Shipping box dimensional weight calculator

Carriers do not always bill a parcel by what it weighs on the scale. They also work out a dimensional weight from the size of the box and charge whichever of the two numbers is larger. Enter the box length, width and height, the divisor and the actual weight to see both figures and which one sets your billable weight, so a large, light box does not surprise you at checkout. Everything is calculated in your browser, so your numbers never leave your device.

Runs in your browser; what you type never leaves your device.

Box size

Inches for divisor 139 or 166, centimeters for 5000.

Use the same unit as the length.

Use the same unit as the length.

Weight and divisor

Leave empty for 139 in³/lb. Use 166 or 5000 cm³/kg if your carrier does; carriers differ, so confirm on their rate sheet.

Pounds for divisors in cubic inches, kilograms for 5000.

Your billable weight

Enter the box size and the actual weight to see the billable weight.

Dimensional weight
—
Billable weight
—
Charged on
—

Divisors and rounding rules vary by carrier; check each carrier's rate sheet. This tool compares weights only and quotes no prices.

How to use it

  1. Enter the box length, width and height in inches, or in centimeters if you use 5000.
  2. Keep the divisor at 139 or type the one on your carrier's rate sheet, then enter the actual weight.
  3. Read the dimensional weight, the billable weight and which of the two is being charged.

Frequently asked questions

How is dimensional weight calculated?

Multiply length by width by height, then divide by the divisor. A 20 x 20 x 20 inch box with divisor 139 gives 8,000 / 139, which is 57.55 lb of dimensional weight.

Which divisor should I use: 139, 166 or 5000?

139 and 166 are in cubic inches per pound, and 5000 is cubic centimeters per kilogram. Divisors differ between carriers and services, so check each carrier's rate sheet before relying on a result.

How is the billable weight chosen?

The billable weight is the larger of the dimensional weight and the actual weight. A 12 lb parcel with 3.45 lb of dimensional weight is billed at 12 lb, and a tie counts as actual.

Does the calculator round the dimensional weight?

Yes, it rounds to two decimals. Many carriers round up to the next whole unit or measure the box to the next inch, and this tool does not apply those rules, so compare with your quote.

Does it include shipping rates or surcharges?

No. It only compares the two weights and does not know zones, fuel surcharges, oversize fees or discounts. Use the billable weight to look up the price in your carrier's rate table.

Version 0.1.0 · Updated 2026-11-13